Draft Beer Equipment

Home / Homebrewing / Draft Beer Equipment
Tank Empty CO2 - 5 Lb
Brew and Grow ships our 5 lb. aluminum CO2 tanks empty per federal law. We recommend checking local listings for industrial gas suppliers as providers for not only CO2 but also beer mix. (76% Nitrogen and 24% CO2) Filled 5 lb. tanks can efficiently carbon
Add to cart
Tank Empty CO2 - 5 Lb
$99.99
Poppet Valve (Becker)
Periodically, during serving or carbonating operations, the Becker Disconnect Poppet may become damaged or wear out over time, leaking CO2 or liquid from the keg.  To replace the poppet, simply unscrew the Liquid Plug Cap from the top of the disconne
Add to cart
Poppet Valve (Becker)
$1.99
Poppet - Cornelius Ball Keg
Designed to fit both ball and pin-lock kegs manufactured by Cornelius, the poppet can be correctly installed inside the tank plugs of Spartan and Super Champion soda kegs, forming a tight, leak free seal.Application Tip:Worn poppets leak and should be rep
Add to cart
Poppet - Cornelius Ball Keg
$7.99
Chrome-Plated Coupling Nut
The Coupling Nut secures the connection between the Phaucet Adaptor and the threads machined into the body of a Chrome or Perlick Faucet. To complete the assembly, a Faucet Wrench is required to fasten the components together and create a liquid tight sea
Add to cart
Chrome-Plated Coupling Nut
$4.75
Air Distributor - 3-Way w/ 5/16" Barb
3 – Way Air Distributors provide home brewers with the capability of serving beer from three kegs while utilizing a single CO2 tank. Outlet barbs fit standard 5/16” gas tubing. Shut-off valves are equipped with ball check valves and each spli
Add to cart
Air Distributor - 3-Way w/ 5/16" Barb
$39.99
Regulator Connector
The Regulator Connector threads into the input and output ports of Secondary Regulators, allowing multiple Secondary Regulators to be chained together in series and ultimately connected to the Primary Regulator attached to a CO2 Tank for controlled distri
Add to cart
Regulator Connector
$4.06
Gauge 2" 0-60 lb Right Hand - 1/4" MPT
The 0 – 60 lb. 2” gauge replaces worn or damaged gauges in Double Gauge or Secondary Regulators.
Add to cart
Gauge 2" 0-60 lb Right Hand - 1/4" MPT
$10.18
Dip Tube Gas - 5 Gal Ball Lock Keg
Constructed of stainless steel, the Gas Dip Tube fits all Cornelius kegs of the 2.5, 3 and 5 – gallon variety. To complete installation, the Gas Dip Tube requires a Dip Tube O-Ring. Does not replace nylon dip tubes from older Firestone ball lock k
Add to cart
Dip Tube Gas - 5 Gal Ball Lock Keg
$5.50
Wall Coupling - Aluminum Washer
The Aluminum Washer is a crucial component for the installation of a Wall Coupling into the wall of jockey box.For proper mounting, the Aluminum Washer is situated against the wall of the Jockey Box while a Rubber Washer is placed between the Aluminum Was
Add to cart
Wall Coupling - Aluminum Washer
$3.50
Premium Pressurized Hand Pump Beer line Cleaner kit
Includes: beer line cleaning brush, Tap brush and seal and double shank and faucet wrench.
Add to cart
Premium Pressurized Hand Pump Beer line Cleaner kit
$57.98
Tubing Silicone High Temp 1/2'' ID - Per Foot
High Temp tubing is ideal for the transfer of hot water and wort during brewing processes, especially from boiling vessel to wort chiller.
Add to cart
Tubing Silicone High Temp 1/2'' ID - Per Foot
$5.49
Tubing Gas Hose 5/16" ID - CLEAR Per Foot
Sold per foot, our 5/16” gas tubing provides reliable and durable gas delivery to soda kegs in keggerator installations.
Add to cart
Tubing Gas Hose 5/16" ID - CLEAR Per Foot
$1.50
Tubing Silicone High Temp 3/8" ID - Per Foot
High Temp tubing is ideal for the transfer of hot water and wort during brewing processes, especially from boiling vessel to wort chiller.
Add to cart
Tubing Silicone High Temp 3/8" ID - Per Foot
$4.60
Sanke Tap American Type D
Designed to fit American style commercial kegs, the Sanke Head is shipped complete with 5/16” gas tail piece but minus the beer dispensing tail piece, neoprene washer and hex or wing nut.The American Sanke Keg Coupler is the most commonly utilized s
Add to cart
Sanke Tap American Type D
$55.00
Faucet Rubber Washer
The Coupling Gasket is situated in the back of the Perlick Faucet body at the point of connection between the faucet and the shank in a draft system. The Gasket forms a liquid tight seal between the two pieces of equipment.Application Tip:If a leak occurs
Add to cart
Faucet Rubber Washer
$0.99
Regulator - Nitrogen
Similar in function to CO2 Regulators, the Nitrogen Regulator controls the dispensing of beer gas or straight nitrogen, providing the classic “nitro” cascade from carbonation created by beer gas. By installing a Stout Faucet home brewers can f
Add to cart
Regulator - Nitrogen
$129.99
Disconnect Pin Gas
Manufactured with two locking slots to match the gas in pins of a tank plug on a pin lock soda keg, the Gas Pin Disconnect requires a gas, nut and stem assembly for proper connection to 5/16” gas tubing.
Add to cart
Disconnect Pin Gas
$10.20
Petrol Gel Keg Lubricant 4 oz
For sealing keg lids into keg openings, a thin coating of Petro Gel on the Closure O-Ring will typically provide the correct amount for preventing CO2 and beverage leaks. Stubborn leaks may require a thicker coating. Once applied, re-attach the lid to the
Add to cart
Petrol Gel Keg Lubricant 4 oz
$10.99
CO2 Keg Charger Refill - 16g
CO2 Keg Charger Refill - 16 Gram
Add to cart
CO2 Keg Charger Refill - 16g
$2.38
O-Ring Closure Original / Keg
Formed of high quality soft rubber, the Closure Original fits both ball and pin lock keg lids, providing effective leak protection for beers requiring low and high – pressure CO2 settings.To prevent troublesome leaks and potential infections, Brew a
Add to cart
O-Ring Closure Original / Keg
$3.99
Faucet - Chrome Stout
Pour Stout with the creamy texture and the classic cascade of a Dublin pub! The Chrome Stout Faucet is manufactured with a restrictor plate, providing the correct turbulence to create the rich, velvety mouthfeel expected of stout.To complete the system, c
Add to cart
Faucet - Chrome Stout
$59.99
Keg 5 Gal Ball Lock - Used As-Is
Ball Lock Keg 5 Gallon - UsedThese kegs are used and in as is condition. We recommend thorough cleaning, sanitization, and changing all O-rings and poppets and possibly down tubes prior to use.
Add to cart
Keg 5 Gal Ball Lock - Used As-Is
$79.99
Worm Clamp Stainless Small 1/4" - 5/8"
Worm Clamps are typically utilized in temporary or permanent installations in beverage and brewing systems. Attached or removed with a standard flat head screwdriver, the 1/8” – ½” worm clamp fastens 3/16” or ¼” tubing
Add to cart
Worm Clamp Stainless Small 1/4" - 5/8"
$2.50
Cap Washer (For Becker Disconnect)
The Cap Washer fits between the Plug Cap and the disconnect housing of both Becker Gas and Liquid Disconnects, forming a liquid or air tight seal and preventing troublesome leaks.Storing a small inventory of disconnect washers in the brewery will prevent
Add to cart
Cap Washer (For Becker Disconnect)
$0.99